Configure Roblox
The bootstrapper has to find the running Roblox client and attach to it. Two Roblox settings routinely get in the way, and leftover files from previous installs cause the rest of the “it injected once and never again” reports.
Do this page after Prepare Windows and before Install SirHurt.
Step 1 - Disable Launch on startup
Section titled “Step 1 - Disable Launch on startup”-
Open Roblox and open its Settings menu (the gear icon inside the app, or press
Escwhile in a game and open the settings tab). -
Find Launch on startup and switch it off. The exact label can differ slightly between Roblox versions - look for the option that makes Roblox open itself when Windows starts.
-
Leave the settings menu open for the next step.
Step 2 - Disable Minimize to tray when closed
Section titled “Step 2 - Disable Minimize to tray when closed”-
In the same settings menu, find Minimize to tray when closed and switch it off.
-
If you see something like Close Roblox to system tray instead, that’s the same option.
-
Close the settings menu so the change is saved.
Step 3 - Fully close Roblox
Section titled “Step 3 - Fully close Roblox”Both settings above only take effect on a fresh start, so clearing out any existing client is part of the job.
-
Close the Roblox window normally.
-
Check the system tray (the arrow near the clock) for a Roblox icon. If it’s there, right-click it and choose Close/Exit. With the tray setting now off, this should be the last time it appears.
-
Open Task Manager with
CtrlShiftEscand look through the process list for anything named Roblox -RobloxPlayerBetais the usual one. -
End any Roblox process you find, then confirm the list stays empty.
-
Reopen Roblox and close it once more to verify it now closes completely instead of hiding in the tray.
Step 4 - Clear a stale install (only if needed)
Section titled “Step 4 - Clear a stale install (only if needed)”If you’ve had SirHurt installed before, or injection has stopped working after previously working, old files are the likely cause. The SirHurt Cleaner wipes them.
-
Download the SirHurt Cleaner - it ships bundled with Sirstrap.
-
Make sure Roblox is fully closed first (step 3).
-
Run the cleaner and press
Yfollowed byEnterfor every prompt. Answering only some of them leaves the remnants behind, which defeats the point. -
Let it finish, then confirm your SirHurt folder no longer contains leftover binaries.
Step 5 - Handle version errors
Section titled “Step 5 - Handle version errors”If SirHurt reports that you’re on an unsupported version, Roblox has been updated past the build SirHurt has been patched for. This can happen immediately after a Roblox release.
-
Check the announcements channel in our Discord for the currently supported build.
-
Note the recommended build hash - it looks like
version-abc123cbt4204mee. -
Follow the Downgrade Tutorial to install that build, or open the Downgrade Thingamabob 6000 and use Download Previous Version, which tracks the current downgrade target for you.
-
Repeat from step 1 if Roblox updates again before you finish.
Step 6 - Verify before continuing
Section titled “Step 6 - Verify before continuing”-
Launch on startup is off.
-
Minimize to tray when closed is off.
-
No Roblox processes remain in Task Manager after closing the app.
-
Roblox has been reopened at least once since the settings were changed.
-
If you ran the Cleaner, it completed with
YandEnteron all prompts.
Once this list is clean, move on to Install SirHurt. If a later step still fails, Troubleshooting works through each symptom individually.
Made by SIX - Report Issues to them.