Skip to content

Inject

Injection is the step where order and timing matter most. Roblox has to be up and fully loaded before the bootstrapper can attach, and the bootstrapper has to run with elevation or it won’t be able to touch the client. Most “injection failed” reports trace back to one of the three earlier pages.

  1. Launch Roblox first, before the bootstrapper.

  2. Join any game. You can’t inject from the Roblox home screen - there needs to be a live game client to attach to.

  3. Let the game finish loading. If you inject while the loading screen is still up, the injector can attach to a client that isn’t ready yet.

  4. Leave Roblox in the foreground for the next step rather than minimising it.

  1. After joining, wait 5-10 seconds without doing anything else.

  2. This gives the client time to finish initialising and for Roblox’s own startup scripts to settle.

  3. If you’re on a slow machine or a large game, err on the longer side.

Step 3 - Run the bootstrapper as Administrator

Section titled “Step 3 - Run the bootstrapper as Administrator”
  1. Locate the bootstrapper (SirHurt V5.exe) in your SirHurt folder - see Install SirHurt if you’re not sure where that is.

  2. Right-click it and choose Run as administrator. Don’t just double-click it - without elevation it can’t attach to Roblox or write to the Roblox directory.

  3. Approve the Windows UAC prompt.

  4. If your antivirus pops up with a warning at this point, something in step 2 of Preparation didn’t stick. Fix the exclusions before going further.

Step 4 - Confirm the bootstrapper sees Roblox

Section titled “Step 4 - Confirm the bootstrapper sees Roblox”
  1. Leave the bootstrapper window open and let it settle.

  2. It should report that it has located the running Roblox client. Wait for that status rather than clicking straight away.

  3. If it sits at “waiting” or never detects Roblox, stop here and check Troubleshooting - injecting from that state is what produces “nothing happened”.

  1. Click Inject once.

  2. Log in when the prompt appears, using your SirHurt credentials.

  3. Wait for it to report a successful attach.

Don’t judge the injection by whether the UI looks right.

  1. Pick a small, well-maintained test script such as Infinite Yield.

  2. Execute it and watch for its console or on-screen output.

  3. A script that runs confirms the injector is live. If it doesn’t run, the problem is in the injection rather than the script - see Troubleshooting.

  4. Only test your real scripts once the injector is confirmed working, so you’re not debugging two things at once.

That’s the whole path: Prepare → Configure → Install → Inject. Once an injection has worked, treat Troubleshooting as the reference for anything that breaks later, and Start here as the map if you ever need to redo a stage.

  1. Confirm the Roblox settings are still off. Roblox can reset them after an update.

  2. Fully close Roblox, including any tray process, then start again from step 1.

  3. If the bootstrapper hangs or closes instantly, use the Kill Processes button in the UI and retry.

  4. Work the matching symptom on the Troubleshooting page instead of guessing - each one is a numbered walkthrough.

  5. If you’re told you’re on an unsupported version, that’s a Roblox update, not a broken setup. See the Downgrade Tutorial.

Made by SIX - Report Issues to them.